There's nothing more annoying than squeaky Car Wiper Blades. How many times have you found yourself just constantly the one wipe switch, and that only when your vision gets really bad? That's very stressful and potentially dangerous, but thankfully, you can take some simple measures to overcome the problem.

First of all, keep your whole windscreen clean. When you wash your car; don't forget to lift the wiperblades off the windscreen and wash and rinse the area below them, even though that isn't the area you look through.
It's important to keep the whole windscreen clean, because, when the screen is wet, the dirt particles become very mobile, and can get under the edge of the blade. This has several effects:-

Firstly, the particles between the screen and the blade cause uneven contact|friction between screen and blade. This causes the blade to vibrate, creating noise. This problem is made worse if you have rubber Windscreen Wipers, because they loose their flexibility with age and exposure to Ultra Violet Light, Ozone, many Screen Wash ingredients, and pollution. As the blade becomes stiffer it's much more likely to jump and judder as it moves from clean to dirty glass.

Secondly, the dirt & grit particles abrade and cut the surface of the wiper blade right at the critical working edge. On rubber Car Wiper Blades this also increases the area for UV, Pollution, Ozone and solvents to attack the rubber, so speeding up the hardening process, which in turn makes the noise worse.

Thirdly, the dirt and grit particles settle on the non-working surfaces of the wiper blade. These particles harbour road grease & pollutants, which attack the rubber from the sides, causing more hardening and in turn more susceptibility to juddering and noise.
When the blade looses its flexibility and then is subjected to juddering, it tears at the mounting. As a result the rubber wears or tears at the critical mounting points, and the mounting points themselves become deformed and loose. This in turn leads to more judder, and so the cycle speeds accelerates.

Flatblade Wiper Blades are much more resistant to this last problem, because they have a much more substantial anchor point between the blade and the Parts which hold it in place.

As usual, prevention is far better, easier and cheaper than a cure. A stitch in time really can save 9.

Careful cleaning of your Car Wiper Blades will markedly reduce the tendency to judder and make noise, and if you're not lucky enough to have Silicone Windscreen Wipers, it will also markedly slow down the predictable aging process of the rubber.

So, to recapitulate
To minimise and avoid the problem on existing Car Wiper Blades, keep them clean, and be prepared to replace them as soon as the rubber shows signs of hardening, porosity, cracking or tearing.

When you replace your Car Wiper Blades consider using Retrofit Flatblade Wiper Blades, because they hold the blade much more securely, so reducing the opportunity for vibration in the first place, and tearing in the second.

Better still, look for Silicone Windscreen Wiper Blades. The silicone resin stays completely flexible throughout life, and provides smooth quiet operation for at least 3 times the life of even the best rubber Car Wiper Blades.

Best of all look for Silicone Flatblade Wiper Blades. They combine all the advantages of Silicone Windscreen Wipers with the looks & performance of Flatblade Wipers.

Filed under: Cars

Like this post? Subscribe to my RSS feed and get loads more!